Weathershield Creation Sandtex

Their high consistency and filling properties allow them to hide the surface undulations
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Water repellence property ensures a longer life of the texture
  • Provides aesthetics to building exteriors & interiors
  • Dolomite Crystals endow the paint film with superior toughness and high durability
Technical Information
  • Finish Mid Sheen
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On plastered surface of low porosity - 3-15 sq ft / Kg / coat These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Dolomite Crystals endow the paint film with superior toughness and high durability
  • Provides aesthetics to building exteriors & interiors
  • Water repellence property ensures a longer life of the texture

Product Description

Dulux Professional Weathershield Creation Sandtex are formulated with special materials
such as mineral crystals that give them unparalleled toughness and durability, making them
a perfect choice for exteriors and interiors. Their high consistency and filling properties
allow them to hide the surface imperfections.

Application Description

Surface Preparation

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush followed by water jetting if required.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3.
Avoid application of putty or filling compounds while painting an exterior surface.
Application of one coat of Pre-Treatment coat is recommended for better performance of the paint.
Application Tools

By roller, brush , trowel or conventional / airless spray (0.5mm to 3mm)

Dilution
No thinning of the material is recommended for the final coat. But for ease of application a little water can be sprinkled.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,
    algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush followed
    by water jetting if required. Fill up all minor cracks and defects with cement and sand mixture
    in the ratio 1:3. Avoid application of putty or filling compounds while painting an exterior
    surface. Application of one coat of Pre-Treatment coat is recommended for better
    performance of the paint.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...