Exterior

Weathershield Elastomeric

Mid Sheen Finish

Dulux Professional Weathershield Elastomeric is a technologically advanced exterior emulsion which protects exterior walls from patches of dampness in addition to algae and fungus formation caused by rain.

Healthcare

Residential

Education

Commercial

Key Information

Coverage50 - 65 ft²/L


Drying Time2 - 4 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Dulux Professional Weathershield Elastomeric is a technologically advanced exterior emulsion which protects exterior walls from patches of dampness in addition to algae and fungus formation caused by rain. Its unique technology covers hairline cracks and prevents water ingress, preventing dampness on the building surface.
 

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

 
1 Start 2 Complete

Features

  • 2 times more stretchable regular elastic latex film bridges the hairline cracks due to its unique elastomeric properties
  • Offers 2X more water resistance and keeps your home free from dampness and fungus.
  • Reduces the surface temperature through its unique SunReflect Technology that reflects the Infra Red (IR) rays up to 2 times in comparison to regular exterior paints and thus keeps the surface of the building up to 5ºC cooler
  • *based on tests conducted by BSD Singapore and applicable to selected colours.

Tips & Advice

Surface Preparation

  • Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • Avoid inhalation of dust during cleaning of the surface. For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.
  • Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
  • Freshly plastered surfaces must be allowed to cure completely. For best adhesion performance, the moisture content in the wall should not exceed 10%.   

Application Tools
By roller, brush or conventional /airless spray  (nozzle size 0.5mm to 0.7mm).

Dilution
Dilute 1L of paint with 400-500 ml clean water. In case of deep colours, dilute 1L of paint with a maximum of 250 ml clean water. 25-30% dilution is mandatory for roller application (An additional coat may be required for full opacity).

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.